WWC - Shredders technical data
WWC - Shredders in more detail
WWC Shredders are fitted with a slowly rotating profile solid steel rotor (260 or 360mm Dia) which is mounted on the sturdy machine base. The knives are available in various designs for all kinds of material. These knives feature a low wear and can be rotated several times before they eventually need to be replaced.
The screen is made of heavy welded construction, with the screen size determining the size of the chips. Screens with different hole sizes for all kinds of material are available.
The main rotor is driven by a V-belt drive and a spur gear with torque support.
The material to be shredis filled into the hopper, the Siemens PLC determines the optimal feeding rate depending on the power input from the main motor. Thereby the highest possible throughput can be realised. After reaching the front position the hydraulic slider drives back with fast hydraulic into starting position the cycle restarts. The shredding occurs in-between the rotor and the fixed counter-knife.
The slider can be fitted with wipers in order to prevent materials from jamming the pusher. The chips can be delivered out of the machine by means of suction or conveyor screw.
Once the material is shredded completely the machine turns off automatically. WWC shredders are fitted with dust-tight control cabinet for the PLC control. These machines are manufactured in Germany and have been CE-certified.